Cisco Catalyst 2950 Series switches are fixed-configuration models that provide wire-speed Fast Ethernet and Gigabit Ethernet connectivity for small and medium-sized networks. The Cisco Catalyst 2950 Series is an affordable product line that brings intelligent services, such as enhanced security, high availability, and advanced quality of service (QoS), to the network edge—while maintaining the simplicity of traditional LAN switching.
| Key Specifications | Catalyst 2950T 24 Port Switch |
| Manufacturer | Cisco | | Manufacturer Part # | WS-C2950T-24 | | Device Type | 10/100BaseTX Ethernet Switch | | Enclosure Type | 1U 19" Rack-mountable
1U 24" Rack-mountable
Wall-mountable
Desktop | | Memory | 16 MB DRAM, 8 MB Flash Memory | | Networking | Connectivity Technology | 10/100BaseTX Wired Ethernet | Data Transfer Rate | 10Mbps Ethernet (Half/Full-duplex)
100Mbps Fast Ethernet (Half/Full-duplex)
1Gbps Gigabit Ethernet Uplink Only (Half/Full-duplex) | Remote Management | - SNMP
- Telnet
- RMON
- CWSI
- (CLI)-based out-of-band
- embedded CMS | Remote Management Protocol | IGMP, PVST+, PAgP, VTP, DTP, TFTP, NTP, CMP, LACP | Communication Mode | Full-Duplex, Half-Duplex | Status Indicators | Port status, link activity, port transmission speed, port duplex mode, bandwidth utilization %, power | Features | - Enhanced Software Image (EI) installed
- Filtering of incoming traffic flows based on Layer 2, Layer 3, or Layer 4 ACPs prevents unauthorized data flows.
- Private VLAN edge
- IEEE 802.1x for dynamic port-based security.
- STRG
- The STP PortFast/ BPDU guard
- TACACS+ and Remote Access Dial-In User Service (RADIUS) authentication | Compliant Standards | IEEE 802.3
IEEE 802.3U
IEEE 802.1D
IEEE 802.3ab
IEEE 802.1p
IEEE 802.3ad (LACP)
IEEE 802.1w
IEEE 802.1x
IEEE 802.1s | | Interfaces | Interfaces | 24 x network node - Ethernet 10Base-T/100Base-TX - RJ-45
2 x network host - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 | Power
Requirements | Power Supply | Internal | Voltage | 100 to 127 or 200 to 240 VAC (auto-ranging), 50 to 60 Hz | Consumption | 30 Watts Maximum | Other Features | 135,000 Hours MTBF | Dimensions
(H X W X D) | Unit | 1.72 x 17.5 x 9.52 in. | Weight | Unit | 6.5 lbs | Warranty | Limited Lifetime Warranty |
|
Lab Certification Kits
