As you may know, the new CCNP test requires IOS 12.4 which the cheaper routers do not support so you will need to step up to the 2600XM series. So understanding that you may want an advanced CCNA lab kit that you can use as a starter CCNP kit, we developed this kit for those on a limited budget. This kit will support all the features to pass your CCNA and give you a start on your CCNP certification. The 2600XM series is going to support 12.4, IPv6 and SDM.  We include a 2610XM router for this and a 2621 router which is dual 100mb Etherent router for cable/DSL NAT/PAT labs.  The 2610XM will house the NM-4A/S and act as your frame-relay router. The 2621 will be your dual FastEthernet router supporting NAT/PAT and Cable/DSL Routing.  The 2500 series unit can be used in a few different ways and will support IPv6. The three 2950s will  round out your switch Domain(you may want to consider upgrading the 2950 Standard Image switches to Enhanced Image with the 2950T model to support a few more commads as covered in our Lab Suggestions article). Other kits don't have console kits, serial cards, back to back cables or the latest IOS software.

No one else has our copyrighted 224 page CertificationKits Self Study CCNA Lab Workbook that will walk you through 60 different labs! Not only that, you will also get our CCNA How & Why We Subnet Workbook that walks you through 100 pages of subnetting.  Why spend hundreds of dollars on a lab kit if you don't have the labs to accompany your equipment? Other kits don't have console kits, transceivers, back to back cables or the latest software.

You will also get our CertificationKits CCNA Test Engine with over 500 different questions and Flash Cards. Not only that, but you will also get CCNA test tips, the IOS on CD, CertificationKits TFTP Server, our Binary Bits game, Subnet Calculator and other prep material.   There is also more!  You will also receive our CertificationKits CCNA CRAM Sheet.  This six page, full color, laminated foldout is a great addition to your CCNA Study arsenal.  Finally, you will also get our CertificationKits CCNA TCP/IP Study Poster. 

These routers are in excellent condition and are guaranteed working! The extra information provided on CD is worth $200 by itself. You will be provided with everything you need to hit the ground running to prepare for your test. No need to spend hours looking for tools, procedures, test review material or fumbling around looking for labs. This is a great educational lab kit. Software licensing is the responsibility of the buyer and is provided on the CD only as a backup of what was loaded on the router when we purchased it.